WEIERYANG
Sculpture OEM buyer guide

Water Feature Sculpture OEM Quote Checklist

Published By WEIERYANGEnglish procurement guide
Concept study of a reflective metal sculpture and shallow water in a plaza at night
Concept-stage plaza illustration for discussing the relationship between sculpture, water and lighting.

Mark how the artwork meets the water

Start with the water path and the sculpture footprint. A reflecting pool sculpture might stand on a dry plinth beside the basin, sit on a support in a wetted zone or carry water through an outlet in the artwork. Mark the normal waterline, splash area, mounting surface and any pipe or cable crossings on the same section. Ask the fountain designer to confirm the operating conditions that the sculpture drawing should use.

For a custom fountain sculpture with an integrated outlet, show the point where the fountain contractor’s pipe meets the fabricated assembly. Identify any removable panels needed to reach that connection after installation. For a dry plinth beside a separate pool, show the pool edge and the art fixing detail so the two packages can be priced separately.

Assign six interfaces before comparing quotes

Use the table as a scope schedule. On each row, enter the drawing number and revision, the named parties responsible for design, supply, installation and verification, and the item each quote includes or excludes. Record unresolved decisions with a named owner and a due date.

On a small screen, scroll the table sideways to read all columns.

Water feature sculpture OEM responsibility schedule
InterfaceWhat to show in the quotation drawingsWhat to record before release
Artwork and baseArtwork envelope, orientation, base plate and mating support shown on the same section.Who designs each side of the fixing, supplies the matching parts and checks the interface before fabrication.
Basin and waterproofingFinish levels, mounting surface and any sleeves or penetrations through the basin assembly.Who details the penetration, installs the sealing system and checks the basin before the interface is covered.
Outlet and pipe connectionConnection location, mating parts and access path for fitting or removing a nozzle.Who supplies the outlet or nozzle, completes the connection and checks the agreed water effect.
Pump and circulationFountain equipment schedule, piping limits and maintenance access relevant to the artwork.Who owns the equipment selection, supply, connections and circulation checks.
Lighting and controlsFixture positions, cable exit points, routing boundaries and access to serviceable components.Who supplies the fixtures and controls, completes site wiring and checks the agreed lighting scenes.
Site assembly and handoverDelivery limit, lifting access, assembly sequence and agreed inspection points.Who receives, lifts and installs each package, leads the wet test and hands over operating records.

Compare two quotes on the same scope

Consider an illustrative fountain sculpture with a removable nozzle. Quote A includes the artwork and terminates at a connection on the sculpture. Quote B includes the artwork, the connection and the nozzle. Put the nozzle, matching pipework, access panel and wet test on separate rows. Ask each bidder to mark each row as included, separately priced, supplied by the site team or awaiting a decision. If the nozzle is selected later, record who will approve its envelope before the artwork drawing is released.

Send changes in writing with a drawing revision. A moved outlet or revised basin level can affect more than one scope line. Review the affected lines with both packages before requesting revised pricing.

Close the drawing and handover gaps

Before the fabrication release, have the project team confirm the latest section, agreed connection points and the responsibilities for any site-supplied components. For the installation release, confirm access and lifting with the site team. Assign someone to record the agreed water-effect and lighting checks at handover, then pass the final interface drawings and relevant equipment instructions to the operator.

The workshop photograph below shows curved metal components during production. For your own sculpture, ask the fabricator to mark which components are accessible for inspection and which connections the site team will complete.

Curved metal components arranged on tables in the WEIERYANG workshop
WEIERYANG workshop record showing curved components on worktables. Their eventual application is unspecified.

Copy these fields into your request for quotation

  • Site and application, such as a resort reflecting pool or public fountain court.
  • Drawing numbers and revisions for the artwork, basin and relevant services.
  • Water relationship and marked connection points for the sculpture.
  • Design, supply, installation and verification parties for each interface.
  • Inclusions, separately priced options and items supplied by others.
  • Open decisions, approval dates and the required inspection or handover records.

Send your marked-up section and scope schedule through the private sculpture project brief. Use the water feature material checklist to prepare the separate finish and exposure discussion.

Frequently asked questions

Does a fountain sculpture OEM quote include the pump and controls?

Check the equipment list and scope schedule. Confirm the pump, circulation equipment, controls and connections as separate lines, with a named supplier and a named party responsible for the site checks.

Can a concept rendering be used for initial pricing?

A concept can support an indicative discussion. Give the bidders the same assumed sculpture envelope and water relationship, then request a revised quote when the basin section, connection points and exclusions are confirmed.

Who is responsible for sealing around the sculpture base?

Assign the sealing detail and verification to named parties in the project scope. The sculpture fabricator and basin team should coordinate the base, sleeves and other penetrations against the same section drawing.

Which documents should reach the fountain operator at handover?

Agree the record list in the quote. It can include final interface drawings, equipment instructions, inspection and wet-test records, and access notes for the serviceable parts included in the project.

Sources and project evidence

The article uses a concept illustration and a workshop photograph. Their captions identify what each image shows. Agree the technical scope and acceptance records for the actual project.

Explore the related sculpture application and process · Share your drawings and project brief